USB3.0 controler supports UASP ?

[belette]

Hi,

I am about to buy a USB 3.0 UASP capable device (hard drive external chassis).
I would like to connect through USB 3.0 to my IPC2 but I would like to check first if the controler model in the IPC2 is supported UASP?

Please don't hesitate if you have more information and if you have the USB 3.0 model by the way.

many thanks

[mbirger]

In the datasheets of the processor I can’t see any relevance to UASP, but to standard USB3 downstream port.

[belette]

thanks for your reply.
Like me I haven't see anything related to UASP.
Have you been able to figure out which exact USB3 controler model IPC2 uses?
Intel 8 Series USB 3, Intel 7 Series USB 3, Intel 7 Series USB 2, NEC/Rensas uPD720200 USB 3, NEC/Rensas uPD720201 USB 3, Intel i965 USB 2, Expresscard 54 NEC/Rensas uPD720202....?

[mbirger]

IPC2 uses Intel Mobile Lynx Point PCH which is Intel 8 series chipset.

[belette]

Intel 8 series is a good news, then I have chance that it would work...
I have ordered it and I will test!
many thanks

[mbirger]

Please share if you have good news with UASP

[belette]

Hi,

Just to give you some news as I have received my unit and good news it is working through UAS

lsusb -v -d 152d:9561
bInterfaceProtocol 80 Bulk-Only
bInterfaceProtocol 98

lsusb -t
Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 1: Dev 5, If 0, Class=Mass Storage, Driver=uas, 5000M