BIOS reset

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: BIOS reset

Post by gabrielh »

This procedure require some basic tech skill, and extra care. In a case of failure, this will void your warranty, so please make it on your own risk.

To do so please remove the memory modules and PM me the the picture of the board beneath the modules
Gabriel Heifets

Fit-PC2/3/IntensePC support.

opencompany
Posts: 100
Joined: Tue Apr 21, 2009 10:41 am

Re: BIOS reset

Post by opencompany »

We have a fit-PC3 Pilot-batch unit with a similar issue.

It boots to a "white" shell screen but without keyboard support.
So we are not able to press Esc for exit or change anything else.

Any way to get around this or should we either RMA the unit or maybe try a BIOS reset as well?

Thanks in advance.
Kind Regards,
Kevin Peter Gade

CompuLab Nordic A/S (www.compulabnordic.dk)
Danish distributor of fit-PC and other products from CompuLab since 2008.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: BIOS reset

Post by gabrielh »

Please try a BIOS reset firstly
Gabriel Heifets

Fit-PC2/3/IntensePC support.

opencompany
Posts: 100
Joined: Tue Apr 21, 2009 10:41 am

Re: BIOS reset

Post by opencompany »

gabrielh wrote:Please try a BIOS reset firstly
Ok. Could you send me instructions for that.
Do you need any information / picture to do so?

Thanks.
Kind Regards,
Kevin Peter Gade

CompuLab Nordic A/S (www.compulabnordic.dk)
Danish distributor of fit-PC and other products from CompuLab since 2008.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: BIOS reset

Post by gabrielh »

Please check your inbox for an instructions
Gabriel Heifets

Fit-PC2/3/IntensePC support.

hehzb
Posts: 1
Joined: Sat May 19, 2012 3:29 am

Re: BIOS reset

Post by hehzb »

Same issue w/ my fitPC3, please send me instructions. Thank you very much~!

Best Regards

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: BIOS reset

Post by gabrielh »

Dear Takenaka

Please contact me with your issue by PM
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Poita
Posts: 5
Joined: Mon Feb 18, 2013 11:10 pm

Re: BIOS reset

Post by Poita »

Hi,

Could you please send me the instructions as well?
Mine was working fine last night, went to start it this morning and it doesn't have any video out (so no screen) and doesn't seem to be responding to the keyboard either :(

I had a look at how to reset the bios on the main board but the battery is soldered and I can't see any jumper anywhere.

Thanks,
Peter

Edit: I measured the CMOS battery voltage and its 2.84 volts, this is a little on the low side isn't it?

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: BIOS reset

Post by gabrielh »

Please note that hard resetting BIOS involves some technical skills and may void your warranty. You can contact me directly by PM for instructions.
Gabriel Heifets

Fit-PC2/3/IntensePC support.

startit_ltd
Posts: 181
Joined: Thu Jul 23, 2009 7:18 am

Re: BIOS reset

Post by startit_ltd »

Hello Guys,

I also need a hint, I can manage the technical side and I understand the warranty issue, no problem.
Only thing, I use IntensePC. Story is here: (http://www.fit-pc.com/forum/viewtopic.php?f=96&t=4986).

So, please let me know the way, how to manage it in Fit-PC3, I am interesting to check it in IntensePC.

Thank you in advance!

István

Post Reply

Return to “fit-PC3 BIOS”