Too low vertical scan frequency (57.9 Hz) with EIZO S2111W

Display driver and X11
Post Reply
alex
Posts: 1
Joined: Sat Jul 18, 2009 7:51 pm

Too low vertical scan frequency (57.9 Hz) with EIZO S2111W

Post by alex »

Dear all,
Few days ago I got a new diskless 1.6Ghz wifi fit-PC2 booting ubuntu 8.04 (the forum's image) from an usb device. It's booting fine - however, when the login screen should appear, the display (EIZO S2111W) is showing a too low vertical scan frequency (57.9 Hz instead of at least 59.0 Hz, referring to the display's manual) and a black screen.
Attaching the fit-PC2 to a friend's display (Hewlett Packard) everything works fine.
How can I fix this problem?
Many thanks in advance,
Alex

rvig
Posts: 1
Joined: Fri Sep 18, 2009 9:35 pm

Re: Too low vertical scan frequency (57.9 Hz) with EIZO S2111W

Post by rvig »

Hello, I get a simliar problem with my Belinea 101920, I get an "OUT OF RANGE" message on the monitor.
You can have display with the vesa driver but it's very slow.

I tried to add correct VSync-HSync information in xorg.conf, but it doesn't help.

anyone can help ?
could it work with adding Modelines in xorg.conf ?

ps: I attached the result of ddcprobe, it may be usefull

thanks,
Richard

Mylife
Posts: 66
Joined: Sun Jun 07, 2009 6:38 pm

Re: Too low vertical scan frequency (57.9 Hz) with EIZO S2111W

Post by Mylife »

Sometimes, some monitors don't give good informations to the X-Server.
Maybe resetting the factory settings of the monitor (there's a menu for it on the monitor) could solve the problem ?

On the other hand you could try with Ubuntu 9.04 ?
http://www.fit-pc2.com/forum/viewtopic.php?f=9&t=768

Otherwise, I found this :
https://wiki.ubuntu.com/X/Config/Resolution

Post Reply

Return to “Display driver”