3.5" HDD
Re: 3.5" HDD
The power supply for the Fit-PC2 itself is 12V. I built my own storage solution based on the Fit-PC2. I use two 3.5" hard disks from WD - 3TB together.
The original shipped power supply is too weak to drive 3.5" hard disks. You need a new 12V supply, for example a "tracopower" TMP 60112C.
I built a SATA controller and a power supply for two hard disks on different PCB's. The Fit-PC2 and the hard disks can be supplied with the same 12V power supply.
If you are interested in this solution, you can find further information on my homepage.
http://embedded-solution.de
The original shipped power supply is too weak to drive 3.5" hard disks. You need a new 12V supply, for example a "tracopower" TMP 60112C.
I built a SATA controller and a power supply for two hard disks on different PCB's. The Fit-PC2 and the hard disks can be supplied with the same 12V power supply.
If you are interested in this solution, you can find further information on my homepage.
http://embedded-solution.de