fit-headless-gs and custom resolutions

HDMI display emulator for remote desktop to a headless PC with GPU enabled
Post Reply
Posts: 1
Joined: Thu Jan 26, 2023 8:00 pm

fit-headless-gs and custom resolutions

Post by kshots »

I've got the subject device (been working flawlessly for years) and I utilize moonlight for streaming from this machine to a client that is now (recently) equipped with a 32:9 monitor running at 5120x1440@100. I've added this resolution via the nvidia control panel (and tested it via the "test" button successfully)... but if I "apply", nothing happens (it goes back to the previous resolution). Is this device not capable of that resolution? Do you make one that is? I note that the monitor itself does not support that resolution on an HDMI port (must use display port) - do you have a DP option?

On a side-note, I've also migrated the host to a VM, passing my GPU over along with a virtual display (in this case, virtio-gpu via KVM under proxmox)... if the virtual display is enabled, then it is seamless to switch to 5120x1440@100, even on the real GPU. If I disable the virtual GPU (say, because windows are appearing there without an easy way to reach them, or for other diagnostic reasons), then I can't switch to 5120x1440@100. That said, I'd be willing to buy another device if that turned out to be the problem, because I would like to be able to work this without a virtual GPU.
Life without passion is death in disguise

Posts: 74
Joined: Tue May 05, 2020 7:02 am

Re: fit-headless-gs and custom resolutions

Post by Andrey.Mazlin »

All information about fit-Headless devices, including the supported resolutions, can be found here: ... t-Headless
Right now we do not have any plan for further developing of this product line, sorry.
Andrey Mazlin, Application Support Engineer
Useful links:
Support Wiki:
Support mail:

Post Reply

Return to “fit-Headless and fit-Headless 4K”