Setting up RAID

Post Reply
edasinc
Posts: 5
Joined: Mon Aug 01, 2016 8:26 pm

Setting up RAID

Post by edasinc »

OK, Finally got my barebones Airtop-S with the appropriate memory and would like to set up my system. I would like to set up a RAID 1 array. how do I access the Raid setup?

edasinc
Posts: 5
Joined: Mon Aug 01, 2016 8:26 pm

Re: Setting up RAID

Post by edasinc »

Disregard, I found the setup in the bios.

Plotter
Posts: 4
Joined: Thu Jun 15, 2017 10:59 am

Re: Setting up RAID

Post by Plotter »

I can see where to select RAID in BIOS, but where do you set the type of RAID(0,1,5,10)?
In BIOS it pick up all 4 drives, but when I try to install Windows Server 2012 there is no drives to choose from.
Select - Interface Type - as RAID in the BIOS.

Plotter
Posts: 4
Joined: Thu Jun 15, 2017 10:59 am

Re: Setting up RAID

Post by Plotter »

It works 100% on the Micro server, I setup a few of them.
However it does nothing on the Airtop when you press <Ctrl>I during boot.

mbirger

Re: Setting up RAID

Post by mbirger »

Airtop RAID configuration instructions:
http://fit-pc.com/wiki/index.php/How_to ... _on_Airtop

Post Reply

Return to “General Airtop questions”