Cannot boot
Posted: Sat Nov 12, 2016 10:29 am
My new fitlet-x-lan barbone with a 8GB RAM and m2-SSD card will not show any information on the monitor.
when I power it up with RAM and SSD card in, it only blinks green every 9 to 10 secs.
I did reset the bios via the hardware button.
When I remove the RAM, the power button blinks constantly...
The unit gets quite hot, as if it is doing something.
I switched the HDMI port already, but no signal to monitor either. HDMI cable works on other monitor.
Any idea? Can you help me in any way or do you recommend to request an RMA?
Thanks
Mike
when I power it up with RAM and SSD card in, it only blinks green every 9 to 10 secs.
I did reset the bios via the hardware button.
When I remove the RAM, the power button blinks constantly...
The unit gets quite hot, as if it is doing something.
I switched the HDMI port already, but no signal to monitor either. HDMI cable works on other monitor.
Any idea? Can you help me in any way or do you recommend to request an RMA?
Thanks
Mike