fitlet enclosure drawing

Post Reply
michael.teresi
Posts: 3
Joined: Thu Mar 26, 2015 3:04 pm

fitlet enclosure drawing

Post by michael.teresi »

Hello, I am looking for the drawing of the fitlet enclosure - specifically the fitlet-X-Lan. My application requires a custom mount. I see that there is VESA mounting and DIN rail mounting:

https://plus.google.com/+Fitpc-by-compu ... M1aTr9okjv
https://plus.google.com/+Fitpc-by-compu ... ulab/posts

but those posts do not contain any drawings or views of the bottom of the enclosure. The manual additionally does not contain any drawings, but does contain one view of the bottom of the case, were I see two mounting holes (page 7).

http://fit-pc.com/download/fitlet/docum ... manual.pdf

Would someone be able to point me to the mechanical drawings of the fitlet-X-LAN enclosure?

irads

Re: fitlet enclosure drawing

Post by irads »

We will publish 3D files soon.
Bottom mounting is two M3 threadings 50mm apart.

michael.teresi
Posts: 3
Joined: Thu Mar 26, 2015 3:04 pm

Re: fitlet enclosure drawing

Post by michael.teresi »

Thank you.

michael.teresi
Posts: 3
Joined: Thu Mar 26, 2015 3:04 pm

Re: fitlet enclosure drawing

Post by michael.teresi »

What is the maximum depth of the two holes?
Are the two holes symmetric in the vertical and horizontal direction of the face the holes are drilled from?

irads

Re: fitlet enclosure drawing

Post by irads »

The holes are symmetric on x-y.
M3 threading depth is 3.8mm.

Post Reply

Return to “Mechanical”