Hi, I have the fitlet iA10 hardware version 1.2
I just upgraded the BIOS to the newest version SBCFLT_0.08.08 and now I cannot boot the computer unless I plug out the ram and put it in again.
Where can I find the previous version of the BIOS SBCFLT_0.08.04 ?
--
OK here is an update...
This has nothing to do with plugging the ram in and out. What is the problem is that I have to have the computer turned off for like 10 minutes before I can start it again (for now I plug the power-cord out of the machine), thus reboots are out of the question. This "turn-off" happened automatically when I was pinning the ram in and out.
Another issue with the new bios (and the old one). I tested with the ADATA RAM 8GB DDR3L (the same one as recommended on the wiki for fitlet), but the OS only saw 4GB (and it run on 800Mhz according to lshw). The strange thing, with the new bios, a 1.5V 8GB ram works well, in the sense the OS (fedora/ubuntu) sees the whole thing 8GB. The new ram is Kingston 8GB KFJ-FPC3B/8G DDR3 1333MHz, and according to lshw it is running at 667 MHz.
I think because of this, I don't want to downgrade anymore. But it would be nice to have access to the "SBCFLT_0.08.04". So the initial question stands, could anyone from compulab put it as a download?
best,...
fitlet iA10 bios update and RAM problems
Re: fitlet iA10 bios update and RAM problems
Post by mbirger »
Regarding RAM:
fitlet-A10 memory controller limited up to 1333 Mbps, which is data rate, while 667 MHz is the clock frequency (data rate is twice the memory clock).
Our BIOS expert will get in touch with your regarding downgrades.
Anyway, we will check again the memory behavior of ADATA RAM.
fitlet-A10 memory controller limited up to 1333 Mbps, which is data rate, while 667 MHz is the clock frequency (data rate is twice the memory clock).
Our BIOS expert will get in touch with your regarding downgrades.
Anyway, we will check again the memory behavior of ADATA RAM.
Jump to
- Announcements
- ↳ Read me first
- ↳ News
- ↳ Ordering
- Tensor-PC
- ↳ General Tensor-PC questions
- ↳ Tensor-PC Hardware
- ↳ Tensor-PC Software
- fitlet3
- ↳ General fitlet3 questions
- ↳ fitlet3 hardware
- ↳ fitlet3 software
- ↳ fitlet3 FACET Cards
- Airtop3
- ↳ General Airtop3 questions
- ↳ Airtop3 Hardware
- ↳ Airtop3 Software
- ↳ Airtop3 I3M
- fitlet2 and MBM2
- ↳ General fitlet2 questions
- ↳ fitlet2 hardware
- ↳ fitlet2 software
- ↳ fitlet2 FACET Cards
- ↳ Cool stuff with fitlet2
- Airtop2
- ↳ General Airtop2 questions
- ↳ Airtop2 Software
- ↳ Airtop2 Hardware
- ↳ Airtop2 I3M
- Mature products
- ↳ Airtop
- ↳ General Airtop questions
- ↳ I3M
- ↳ IPC2 (Intense PC2)
- ↳ General IPC2 questions
- ↳ IPC2 availability
- ↳ IPC2 Hardware
- ↳ Linux on IPC2
- ↳ Windows on IPC2
- ↳ Other operating systems on IPC2
- ↳ IPC2 BIOS
- ↳ IPC2 faults and troubleshooting
- ↳ Intense PC and MintBox 2
- ↳ General Intense PC questions
- ↳ Intense PC hardware
- ↳ CPU & Chipset
- ↳ Display interface
- ↳ Memory
- ↳ Storage
- ↳ Ethernet
- ↳ WLAN and miniPCI-e
- ↳ Audio
- ↳ USB
- ↳ Power and heat
- ↳ Linux on Intense PC
- ↳ Linux Mint
- ↳ Other distributions
- ↳ Windows on Intense PC
- ↳ Win7 on Intense PC
- ↳ Win8 on Intense PC
- ↳ Audio
- ↳ Intense PC BIOS
- ↳ Android on Intense PC
- ↳ Intense PC faults and troubleshooting
- ↳ fitlet and MintBox Mini
- ↳ General fitlet questions
- ↳ fitlet performance
- ↳ fitlet hardware
- ↳ Memory
- ↳ Storage
- ↳ Power and heat
- ↳ Mechanical
- ↳ fitlet BIOS
- ↳ Linux on MintBox Mini / Linux on fitlet
- ↳ Windows on fitlet
- ↳ Other operating systems on fitlet
- ↳ FACET Cards
- ↳ fitlet compatible devices
- ↳ Cool stuff with fitlet
- ↳ fitlet faults and troubleshooting
- ↳ fit-PC4
- ↳ General fit-PC4 questions
- ↳ fit-PC4 hardware
- ↳ Windows on fit-PC4
- ↳ Linux on fit-PC4
- ↳ Other operating systems on fit-PC4
- ↳ fit-PC4 BIOS
- ↳ fit-PC4 faults and troubleshooting
- ↳ fit-PC3
- ↳ General fit-PC3 questions
- ↳ fit-PC3 hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Power and Heat
- ↳ Ethernet
- ↳ Windows on fit-PC3
- ↳ Linux on fit-PC3
- ↳ Other operating systems on fit-PC3
- ↳ fit-PC3 BIOS
- ↳ fit-PC3 accessories
- ↳ Using fit-PC3
- ↳ fit-PC3 faults and troubleshooting
- ↳ fit-PC2
- ↳ General fit-PC2 questions
- ↳ Buying fit-PC2
- ↳ Linux on fit-PC2
- ↳ Linux Mint
- ↳ Ubuntu 9.10
- ↳ Ubuntu 10.04
- ↳ Ubuntu 10.10
- ↳ Ubuntu 11.04
- ↳ Other Linux distributions
- ↳ Ubuntu 8.04
- ↳ Ubuntu 9.04
- ↳ Display driver
- ↳ Multimedia in Linux
- ↳ Multimedia in Mint
- ↳ Windows on fit-PC2
- ↳ Windows 7
- ↳ Windows 7 display driver
- ↳ Audio in Win7
- ↳ Windows XP
- ↳ XP installation
- ↳ Display driver
- ↳ Video playback
- ↳ Audio in XP
- ↳ Other Windows versions
- ↳ Other operating systems on fit-PC2
- ↳ FreeBSD
- ↳ fit-PC2 hardware
- ↳ fit-PC2i hardware
- ↳ Display interface
- ↳ Storage
- ↳ Audio
- ↳ WLAN and miniPCI-e
- ↳ USB
- ↳ Auto-ON
- ↳ Power and Heat
- ↳ Ethernet
- ↳ RTC & System clock
- ↳ fit-PC2 BIOS
- ↳ BIOS updates fit-PC2
- ↳ BIOS updates fit-PC2i
- ↳ fit-PC2 accessories
- ↳ Using fit-PC2
- ↳ HTPC
- ↳ Server
- ↳ Control
- ↳ Verified displays
- ↳ Car PC
- ↳ fit-PC1 questions
- ↳ fit-PC Slim questions
- ↳ uSVR
- ↳ General uSVR questions
- ↳ IPC3
- ↳ General IPC3 questions
- ↳ IPC3 Software
- ↳ IPC3 Hardware
- ↳ FACE modules
- ↳ FACE Modules
- ↳ General FACE Module questions
- Compulab accessories
- ↳ fit-Headless and fit-Headless 4K
- ↳ fit-Uptime
- ↳ fit-statUSB
- ECN/PCN
- ↳ fitlet3 ECN/PCN
- ↳ Tensor-I20 ECN/PCN
- ↳ Tensor-I22 ECN/PCN
- ↳ fitlet2 ECN/PCN
- ↳ Airtop3 ECN/PCN
- ↳ IPC3 ECN
- ↳ fitlet1 ECN
- ↳ IPC2 ECN
- ↳ IPC1 ECN
- ↳ Airtop2 ECN
- ↳ Airtop1 ECN
- ↳ fit-PC4 ECN
- ↳ fit-PC3 ECN
- ↳ fit-PC2 ECN
- ↳ FACE Modules ECN
- ↳ FACET Cards ECN
- Wish list
- ↳ Addressed requests