Hi,
I've tried to activate the watchdog on windows 10 but couldn't find any suitable software.
I've installed the software for IPC (1) that didn't work since after activating the watchdog in the BIOS to 240 seconds, the PC gets resets every 4 minutes .
It should be noted that the same software works well on IPC from the first generation after BIOS update while the BIOS in the IPC2 was all ready updated to the latest version.
Please let me know which software should I use for IPC2 WatchDog on windows 10.
Thanks,
Yaniv.
IPC2 WatchDog on Windows 10
-
- Posts: 102
- Joined: Tue May 05, 2020 10:02 am
Re: IPC2 WatchDog on Windows 10
Sorry for such huge delay, but forum is not a best place for getting help.
We strongly recommend to use the standard way - writing mail to our support box: support@fit-pc.com
Such cases need escalation to our hardware engineers and they don't work with forum, sorry.
If you still waiting for reply - please write us mail and we will take care for this issue.
In addition - IPC range of products is obsolete and we don't provide any development for it.
We strongly recommend to use the standard way - writing mail to our support box: support@fit-pc.com
Such cases need escalation to our hardware engineers and they don't work with forum, sorry.
If you still waiting for reply - please write us mail and we will take care for this issue.
In addition - IPC range of products is obsolete and we don't provide any development for it.
Andrey Mazlin,
Edge Computers Department Application Support Engineer
Useful links:
Main site: https://edge.compulab.com/
Support Wiki: http://www.fit-pc.com/wiki/
Support mail: edgesupport@compulab.co.il
Edge Computers Department Application Support Engineer
Useful links:
Main site: https://edge.compulab.com/
Support Wiki: http://www.fit-pc.com/wiki/
Support mail: edgesupport@compulab.co.il