fit-IoT Users Forum

As I wrote earlier, the problems was because of a cheap PS/2 to USB converter and a faulty power brick. The internal components has not been damaged by the faulty power brick, the Intense PC is very strong and reliable. After the problems was solved I made some tests with mprime, to ensure correct o...

Hold down the F2 button while you turn on the Intense PC, then release and press F2 fast for a few times. It may take some tries to enter the BIOS. I had problems with a cheap PS/2 to USB converter. First after changing the adapter and using the instructions just provided, I can enter the BIOS relia...

Is there any way I can check that the faulty power brick has not made any damage to the internal power circuit or other components?

The Intense PC is going to run mission critial software at a remote location, so I would like to make so many tests as possible trying to avoid problems in the future.

UPDATE The problem with entering the BIOS, was caused by a specific type of USB to PS/2 converter. After replacing the converter with another type, I can now enter the BIOS by pressing F2 during boot. The problem with the Intense PC not booting and noise from the power brick was caused by a faulty p...

Does your keyboard connected directly, or through an USB HUB? If you are using an USB HUB, detach the keyboard from it, and connect it directly. I must make a correction to my last post. I have never been able to enter the BIOS by pressing the F2 with my setup. After inserting a new SSD the system ...

A straightforward solution would be having a switch that cuts AC to the power supply. Once you switch on Intense PC will wake up. As a last resort I could probably do that, or even let the Intense PC run for 24/7 as it have a low power use. I found out that I can alter the tone frequency of the whi...

Today, for the first time since the incident with the TV remote, i wanted to enter the BIOS by pressing F2 at boot time, but this is not possible anymore. I press F2 at the boot screen, but the Intense PC just boots directly to the operating system. This was not a problem before. Then only way I can...

1) What type of storage do you use? HDD, SSD, or mSATA drive? 2) It's a little bit hard to say about that issue. The power supply emits sound, but can be barely heard 1) SSD 2) The Intense PC itself when powered on, makes a little noise because of the switching power circuit, I would say that this ...

1) The other day I tried to point the TV remote control at the Intense PC, and press the buttons randomly. The Intense PC was turned off, but the logo flashed orange. Later when I tried to power on the Intense PC, the logo flashed green shortly but then noting happened, I could not get the machine ...