fit-IoT Users Forum

Thanks for the email reply. Looks like the communication problem is on my end. I checked my spam folder this morning and found the RMA response from Dubi sent July 27, so I have responded to that as well.

Thanks again.

It seems as though one of the lan ports on my facet card has died. My OS (linux) does not detect it anymore, and both lights on that port glow faintly when the fitlet is shutdown (while all other ports are completely off). I've switched cables out and tried to connect them to other lan ports, which ...

Thanks to mbirger's question, I've attached usb devices to both blue ports and ran lsusb -t again: /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage...

fmk's solution did not solve my issue; I've added some electrical tape around the port to help shield it and it's still coming up as a USB 2 port (with no usb cables/drives inserted even).

Any other thoughts?

Is the linux expert around? I'm suspecting that the port is actually a USB 2 port and not a USB 3 port on this model, unless there's some type of bios setting I've toggled incorrectly.

I just bought a fitlet-XA10 (very happy customer so far) and connected a usb drive to the back blue port when I noticed it's running at USB 2 speeds. Here is the output of my lsusb -t: /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p...

Does the bios support booting by Mini-PCIe if we put a SSD module in the slot?

Thanks.